How to remove vinyl flooring?

As we evolve, our homes should, too! And talking about home decor, our flooring needs some new changes as well. 

Considering the same, here in this good read we will be sharing some useful information on How to remove vinyl flooring.

So, let’s get started!

Believe it or not, in the olden days, many homeowners loved to cover their hardwood floors with linoleum or vinyl, which used to come in beautiful designs and patterns. However, the linoleum flooring looks gorgeous when we install it for the first time, but there is a saying that every material had its expiry date. 

So, vinyl flooring can run its course too! 

Remove Vinyl Flooring
Remove Vinyl Flooring

If you are dealing with torn, worn, or dated vinyl flooring, then it can get repaired. Professionals may suggest you to remove old vinyl floor and replace it with another floor covering, but hiring a person for this job can cost you a lot!

If your linoleum flooring is still in good condition, then you can install another layer of flooring covering the old one. But we just want to make you aware of one thing. 

Following this shortcut might raise the kitchen or bathroom floor by one-eighth of an inch.

There is a saying by designer Heather Petersen, ‘ There is something so timeless and classic about hardwood floors. They have been used for centuries, for good reason!’ 

But removing sheet vinyl with some creative paper can be a perfect update for your home too. Many homeowners like to replace their old hardwood floors by themselves, but they don’t have the perfect tools and ways. 

If you want to remove old linoleum and turn it into a brand-new floor then keep scrolling.

People can also use liquid chemical-based adhesive removers to remove vinyl flooring. However, removing linoleum glue with these chemicals comes with its own set of issues. 

Your nose might be too sensitive to take in the odor of the chemical. And sometimes, the liquid strippers don’t give 100% results. It will become messier and time-consuming. But we have other ways to remove the adhesive from the sheets as well!

Patience and determination are the key!

Remove Vinyl Flooring
Remove Vinyl Flooring

So, think of this chore as a creative DIY project and upgrade your existing old floor using other right tools. And at the end of your project, you will be stunned with a whole new look of the flooring. 

So, roll your eyes here!

How to remove linoleum flooring?

Are you tired of looking for ways to how to remove linoleum

Then follow our easy steps, which will make things simpler and save your time!

 But remember, not every method will work for the linoleum flooring! So, you will have to keep calm and use your equipment carefully. If one step doesn’t work, then you can use another to remove linoleum as well as glue. Everything depends on how old your linoleum and glue is. 

Now let’s go through our easy easy steps, shall we?

Step 1: Score the flooring into 6″ to 12″ strips.

Firstly, pull off any moulding or trim the borders that are hiding the long wooden or steel boards using the backside of a hammer. You can use your fingers to identify the thickness of the first layer of linoleum.

Don’t just start peeling the linoleum from every corner. Instead, work on smaller sections and score the flooring into 6 to 12 inches of strips. It is perfectly fine if you don’t use the exact measurements to score the floor. But if your linoleum already has a tile pattern, then you can skip the measurements and directly score on the outlines of the tiles.

But don’t get carried away and use all your energy to cut through the material. It will only damage your plywood, and then you will have to buy another one. Trust us, this step seriously will save you from messing up your work and help you to remove one linoleum strip at a time. Now let’s go through the next step!

Step 2: Remove the top layer of flooring material.

This is where the fun part begins! 

After you are done scoring the floor, you have to use some manpower to remove layers of the materials. To completely remove the linoleum, you will have to tackle two layers of linoleum. The top layer will come out easily, just like you peel your banana. 

Remove Top Layer
Remove Top Layer

Then, reposition your hands to peel the next corner of the linoleum.

It can become quite challenging, so are you ready to break a sweat? 

The fun fact is that if you have skipped your gym that day, then it will be like doing a warm-up exercise. So you are doing two things at a time!

Now, hold the edge of your oscillating multitool or use a scraper. Any of them will work fine. Place the equipment underneath the score marks of the paper and start pushing it forward to remove the linoleum. It will easily bring up the linoleum to the top. 

Continue the same procedure with all the sections until you have removed the first layer of linoleum.

Step 3: Remove the underlying paper backing and/or adhesive.

After the first layer of paper is removed, it is time to remove the remaining card paper backing. Here, you can follow two methods. 

In the first one, you can use a heat gun to apply heat on the material to loosen up the adhesive.

If you don’t have one, then you can borrow a hairdryer from your partner or your sibling. We are sure they won’t mind. But it is still better to use a wallpaper steamer to complete this step. 

  • Once you soften the smaller section, scrape up the glue. Make sure not to overdo it, or else it will gouge the subfloor.
  • Complete each section in the same order until all the paper backing and glue has been removed. 

If you find this step boring then we have a secret mantra for you to chant in your mind while doing the work. Just repeat ‘slow and steady wins the race’ when you feel demotivated!

Discard all the first layer of the strips in the trash and get ready for the next step!

Now, things are about to get messier with the second layer of material, which is backed with strong adhesive. 

In the second method, check out the what is required here:

  • Boil water in a pan up to 100 degrees celsius.
  • Pour it directly on the tough linoleum and gum on the subfloor. 
  • Take bigs damp towels to cover the plywood and
  • keep it wet. 
  • Set a timer for ten minutes or keep a track of time. 
  • Then, use a floor stripper to scrape off the residues of gum and linoleum.

Step 4: Prepare the subsurface.

This step is for those who are curious to know how to replace linoleum without any hassle. So keep reading and understand how it gets replaced. Your one mistake can ruin your hard work. 

Floor Installing
Floor Installing
  • Smoothen the plywood and remove the remnants of glue, which is still stuck in the corners. This step might involve resurfacing and refinishing your subfloor. 
  • If possible, you must sand down the hardwood floors to polish it before you place a new linoleum.

Step 5: Measurements of the floor

Take a measuring tape and measure the width and the length of the floor. In the end, multiply these numbers together to find out the area of the room.

Step 6: Buy either linoleum tiles or linoleum sheets.

You can purchase any linoleum tiles or linoleum sheets of any patterns or designs you want. Both the materials are made up of some things. But we advise you to buy sheets because it lasts longer than the linoleum tiles. 

You might notice that some spots in your room have a few steep places, so the linoleum sheets will wrap itself and curl up around those areas. 

Step 7: Install the new linoleum.

It is time for you to perform your last step and then admire your complete work. You should determine the layout of the linoleum sheets or linoleum tiles. Do a run-through and place the plywood before the actual process of the gluing begins.

  • You can trim or cut the edges as per the corners of your sheets and tiles. 

If you want to add sheets or tiles, in the entire kitchen or bathroom, then make sure to remove all the kitchen fixtures and bathroom equipment or plumbing and other counters.

Install Lower Linoleum
Install Lower Linoleum
  • Now, spread the gum around each area of the plywood and do not miss the corners. 
  • Then, press the linoleum sheets onto the glue firmly so that it sticks properly.

Continue the same process into each subsurface. Air can get trapped in some parts of the tiles, so use a 100-pound (45.4-kg) roller to roll over the linoleum sheets.

Small Tips:

We have added a few tips and tricks for you if you run into minor issues. 

Don’t worry if you find stubborn spots that are hard to remove. You can apply some paint thinner to the area or use isopropyl alcohol.  Read the manufacturer’s instructions carefully and let the solvent sit for a while and do its job. Once the time is up, scrape away the remains of the glue slowly without ruining the hardwood underneath.

If you want, you can just lay a new linoleum sheet directly about the current linoleum sheets and skip the above process. 

But if the material is old, then you have no other choice than to remove and replace it with brand new linoleum sheets. 


So, if you are ready to remove the old one, then keep one thing in mind that the above process is a marathon, not a race.

If you have the right tools and patience, then you can get rid of your old linoleum sheets and add a new one. 

Once you complete the process, you will surely want to pat yourself on your back for changing the look of your bathroom and kitchen floor.

Our knowledge sharing is not over yet! 

You can check out some frequently asked questions like how to remove linoleum glue from wood subfloor, and many other questions about flooring by the homeowners below. 

By reading them, you might also find some useful tips to keep in mind while removing and replacing the old linoleum sheets or tiles.

  1. How to remove adhesive from vinyl flooring?

Finding ways to remove tough glue can become very frustrating. If you want to remove it quickly, then you can use a heat gun to soften the adhesive. 

If it does not work, then use vinyl floor adhesive remover and scrape it away to get your work done. 

  1. How to remove glue from concrete floor after removing linoleum?

If the adhesive is stuck on the concrete and you are wondering how to remove linoleum glue from concrete, then try this method. It is perfectly fine to follow the same process to remove linoleum flooring or vinyl flooring glued to the concrete.

Remove Glue
Remove Glue

It is no picnic to remove vinyl or linoleum, or flooring from the concrete floor. Some of the old paper has a tar-based adhesive, which can be softened by using linoleum adhesive remover or any mineral spirits only. 

You can scrape off the remainder with hot water and dish soap to soften the adhesive.

  1. What tools should you use to remove linoleum from the floors?

Have you ever watched a DIY video on YouTube and tried performing it at home? 

Well, you’re not alone! Who doesn’t love to do DIYs? But if you want to do a DIY at home, then you may need some specific tools to get your job done easily.

If you are adamant to complete the work by yourself, then you should own smaller tools like a vinyl floor removal tool, a hammer, utility knife, putty knife, as well as chisel. You can also borrow it from your friends if you don’t have some tools. 

But we suggest you buy these tools so that you can use them in the future as well. These instruments will save your time, which takes to remove vinyl flooring.

  1. How to remove plywood underlayment?

Removing linoleum and underlayment can become a tiresome task. And sometimes, the plywood is screwed into the joists. If you are worried that removing it will ruin the plywood, then don’t be! It is just as easy as removing a door. All you have to do is get your screwdriver and begin your work. You can use a drill as well to unscrew all the screws from the plywood.

Remove Plywood
Remove Plywood

Don’t become Hulk while removing the plywood underlayment. Try to be gentle while pulling up the subfloor.! Just Kidding!

Once you pull it up, you will notice the attractive hardwood below. And next time, if one of your friends asks you how to remove vinyl flooring from plywood, then explain the process to them or simply forward this article.

  1. How to remove vinyl floor tile squares? Is there any best way?

Are you looking for the best way to remove vinyl flooring

With a heavy heart, we have to tell you that there isn’t any shortcut to remove vinyl floor tile squares! But if you want to make your work easier, then buy a heating gun. This equipment works smoother than the butter and will save you time and energy.

Final Words

You have reached the very end of this piece of information. But before we say goodbye, we want you to keep a few things in your mind. 

Floor Tiles
Floor Tiles

Removing old linoleum or vinyl floors is labour-intensive, but the results will surprise you and your loved ones. Plus, it will bring a new life to the outdated bathroom and kitchen. So are you ready to replace your old linoleum sheets? You can contact us if you have any queries.

Stay tuned for more good reads!

Read More: How to wash dress shirts?



Please enter your comment!
Please enter your name here

Latest posts

Chair Decor for Weddings

“As we evolve, our décor ideas should evolve too.”Whenever we think of our wedding day, we become...

How to clean bathroom tiles?

Last year, you installed white tiles in your bathroom because they looked elegant. Though lately, you have been noticing that they seem...


If the user is unable to recreate the leak problem in the interiors of the door because of the stains and...


Chair Decor for Weddings

Chair Decor for Weddings

“As we evolve, our décor ideas should evolve too.”Whenever we think of our wedding day, we become time travellers. And in that wedding list we often think...
How to clean bathroom tiles?

How to clean bathroom tiles?

Last year, you installed white tiles in your bathroom because they looked elegant. Though lately, you have been noticing that they seem dull and have lost their luster.Dust,...
Replace the track


If the user is unable to recreate the leak problem in the interiors of the door because of the stains and rust then it becomes a headache. It is important to...
How to Clean Purge Solenoid Valve?

How to Clean Purge Solenoid Valve?

Seems like something not good with your Purge Solenoid Valve. Cleaning it would be a good choice as per your thoughts? Great! We are here with everything to make your valve work...

How to Plan a Destination Wedding

“Weekend forecast: wedding planning, wine, sleep, repeat.”Your weekend forecast has already been predicted and you are spending it with us by knowing some amazing and useful techniques to...

How to Remove Velcro Adhesive

Looking for the most suitable way to remove the Velcro Adhesive? If Yes, then this is the place you were searching for, Trust Me! But before moving ahead to...


Jack was a sneakerhead. He was passionate about buying new shoes and collected a large variety of them. He loved his shoes more than his clothes. His collection ranged from sneakers, sports...


loved getting cozy with herself and her storybooks in a warm atmosphere under a lighted candle when she was home alone. The whole ambiance made her happy. One fine night she...