You have just moved to your new house, and on one rainy day, you notice water getting in through your sliding glass door. And it stays there.
Don’t worry, you are not the only one suffering from this nightmare!
Normally, a sliding glass door leaks when it rains, especially if it is a rainstorm or a windy storm. And when the rain dies down, the water moves out through the weep holes.
But sometimes, debris gets collected in the holes, and the sliding glass door leaks cold air. And that does not allow water to flow out freely and ruins your window completely.
Are you experiencing such issues? Are you looking for a way to fix such a mess?
Then, we are here to help you, mate!
If you are reading our article because you have water trapped inside your glass door track, leaking inside your home, and damaging your floors, then you are at the right place.
By following our instructions, you will neither have to deal with such a problem in the future and nor have to sacrifice the picturesque views offered by your beautiful glass doors.
We know that the damage is already done, but we hope our article helps you to prevent such issues during the next rainstorm.
So without any further delay, let’s get rolling!
Are you contemplating, “Why does my sliding glass door track fill with water?“
Then, find out the major causes of your problem below!
SIX COMMON PROBLEMS BEHIND WATER INTRUSION THROUGH SLIDING GLASS DOORS
Below, we have listed some major issues you may have moisture entering the sliding doors or windows to help you troubleshoot it on time.
Reason #1: Water enters the base tracks due to the grime and debris blocking the drainage holes. Sometimes, a small amount of water will enter the inner track, sit there for hours and have a gala time, attract more dirt and rely on evaporation to clear.
The small slots of the exterior section might get clogged, and thus, the openings become clogged.
Reason #2: A bent track can be a cause of the water intrusion. If you have hammered the track made up of aluminum, then it might be the reason behind water entering inside the glass door.
Reason #3: See if there is a crack in the glass. Also, check the corners to see if the glass is broken. If it is damaged completely, you will have to replace the entire glass.
Reason #3: Another cause behind the water seeping indoors through sliding glass doors is, worn caulking or flashing. If the door frame does not get sealed properly, the harsh weather and time can cause the caulk to deteriorate.
Reason #4: A crooked or poor framing can let the water pool around the door in the rainy season. Water can find its way through the gaps between the frame and door and ruin the sliding door completely.
Reason #5: If your door was damaged during the installation, then it can let the water enter inside the door. Even the smallest cracks can be the culprit.
Reason #6: Last but not the least, a poor or no water runoff setup can cause the water to pool around the door.
If you found one reason among these common causes, then take action quickly. Don’t put off this home repair for another day because it may cause more damage by just another rainstorm.
Want to know some tips and tricks to solve these kinds of water intrusion?
Then, check out the next sub-topic to fix the sliding patio door weather stripping problem and make it leak-proof.
STEP-BY-STEP GUIDE TO FIX A SLIDING DOOR LEAK
Fixing your leaking sliding glass door is inexpensive, and won’t take much time, and will surely help you to make them clean, waterproof, and sliding!
But before we jump to the steps, you will have to get a list of supplies from the store.
And the supplies are:
- Toothbrush or
- Wire Brush
- WD-40 or
- Silicone Based Lubricant
- Steak Knife
- Screwdrivers Phillips & Slotted
INSTRUCTIONS TO CLEAN YOUR LEAKY SLIDING WINDOW
Most often, sliding doors leak during harsh seasons like winter and monsoon, and they need to be repaired.
So here is how to do it:
Step 1: Check the sliding door for the location of the leak
Firstly, identify from where the sliding door is leaking. Get a garden water hose with a sprayer set and start praying the water from outside the sliding door.
Then, check from the leaking spot. If in case, you cannot find the leaking location, you can inspect the insides of the door for rust and stains.
Step 2: Check the flashing or weatherstripping
Flashing and weatherstripping are rubber insulators located on the bottom of the sliding door. Their main motive is to secure the gap between the bottom of the door and the threshold.
If you see any kind of damage, then make sure to remove the damaged or old flashing or weatherstripping.
Then, replace it with the new ones by attaching them with glue or screws.
Step 3: Inspect the door jamb and frame surrounding the sliding door.
Make sure to check the door frame and the door jamb for damaged or worn caulk. If the caulk has really been damaged, then it is time for you to remove it.
Use a scraper or a putty knife to scrape away the damaged or worn caulk. Once done, wipe the area with a clean cloth and reapply a fresh caulk with the help of a caulking gun.
Step 4: Inspect the glass seal.
Sometimes, the seal between the glass and the door frame starts to decay, and that leads to leaking. So check the seal as well to see if it is the root cause of your problem.
Step 5: Replace the sliding door.
If the damage is beyond repair, replacing the entire sliding window with a new one is the best option. Call a reputable sliding door contractor and get the new door installed.
If you are planning to change the sliding window, then a question surely would have crossed your mind.
And that is…
HOW MUCH DOES IT COST TO REPLACE THE GLASS IN A SLIDING GLASS DOOR?
Well, if you are replacing your old sliding glass doors with a new one, then it will cost around $300 to $5,500 for the installation.
If it does not fit your budget, then you can purchase the glass unit and insert it into the frame yourself. You may need to take a few days off because it might take a week to replace the unit.
If you don’t have much time and need an instant solution, then you will have to repair your old sliding door by cleaning it and repairing the damage. Though it is a temporary fix, it will solve your problem.
If you don’t want to follow this step, then you can skip it and move on to the other one!
Step 6: Clean the Sliding Glass Door Track
Every sliding glass door has straight tracks, and they act as a guide for the roller wheels and the door to run smoothly in the straight direction.
So take a toothbrush or a wire brush and clean the insides of the track to remove the grime and dirt. Once you are satisfied with your work, use a vacuum to suck up all the dirt and grime from the door track.
Step 7: Lubricate the Sliding Glass Door Track
Now, in this final step, use any kind of lubricant and spray on the entire sliding door track.
Wondering, “What is best lubricant for sliding glass doors?”
You can use a silicone-based lubricant, but, if want to do it like a pro, then you can get any one out of these four lubricants listed below:
- Permatex 80070 Silicone Spray
- WD40 Specialist Water Resistant
- DuPont Teflon NonStick DryFilm
- Blaster Garage Door spray lubricant
The above products can be found in any nearby store.
Make sure to spray it all over the glass door and wipe it away immediately if it lands on the floor because it will make the surface slippery.
Step 8: Fix the weep holes!
Spray compressed air or use a crevice tool to clear the weep holes. You can also drill additional holes for better drainage, but that’s totally optional.
Step 9: Adjust Sliding Glass Door Rollers
In this final step, you will have to adjust the rollers that will help it to slide smoothly on the track. All you have to do is use a steak knife to pry the plugs loose in the holes present in your sliding door.
And voila! Your problem is solved!
OUR FINAL THOUGHTS
As you read in our article, there are many reasons you may be experiencing water intrusion through the sliding glass door. For that, the best thing you can do is to inspect your doors carefully and fix them by following our guide. Moreover, cleaning and lubricating it will restore its smoothness as well! While sometimes fixing it up is very effective, in some cases, it might be time for a full glass door replacement. During such instances, you can contact a professional, get it replaced, and prevent moisture from entering your doors in the future.